Mobil Delvac
Mobil Delvac Extreme 10W-30 Full Synthetic Diesel Engine Oil - 1 Gallon, Case of 4 (122454)
Mobil Delvac Extreme 10W-30 Full Synthetic Diesel Engine Oil - 1 Gallon, Case of 4 (122454)
Pay by credit or debit card at checkout — no account needed.
Enter your card on our secure checkout page. Visa, Mastercard, American Express and Discover accepted. Apple Pay and Google Pay are there too for one-tap checkout.
Rather not order online? Call (626) 269-7689 and we will take your card over the phone.
Couldn't load pickup availability
Mobil sells two full synthetic Delvac Extreme 10W-30 oils. Delvac Extreme 10W-30 (this one) is an API CK-4 oil with an HTHS viscosity of 3.6 mPa·s. Delvac Extreme FE 10W-30 is an API FA-4 oil (HTHS 3.1) approved to Detroit DFS 93K223. If your engine calls for FA-4 or 93K223, this is not that oil.
ExxonMobil describes Mobil Delvac™ Extreme as “premium synthetic, high performance, diesel engine oils” built for long drains and extreme operating conditions. This is the 10W-30 grade, rated to API CK-4.
Compared with Delvac 1300 Super, Mobil says it has “46 percent more antioxidant and 44 percent more anti-wear additive”, and that the 10W-30 “has the potential to improve fuel economy” compared with an SAE 15W-40 conventional engine oil.
A case of four sealed 1-gallon jugs, Mobil part number 122454 — 4 gallons in total.
Mobil recommends it for modern diesel engines with EGR, DPFs and DOCs; naturally aspirated and turbocharged diesels; on-highway light and heavy-duty trucking including mixed fleets; and off-highway mining, construction, quarrying and agriculture.
*ExxonMobil bases the multiplier on US engine manufacturers’ average oil drain recommendations and adds: “Consult OEM or ExxonMobil before implementing extended ODIs, especially if the equipment/vehicle is under warranty.” We will not turn that into a mileage figure, because ExxonMobil does not.
Mobil separates a formal approval from a statement that an oil meets or exceeds the requirements of a specification, and from a recommendation. We reproduce the distinction exactly as they publish it, because the three are not the same thing.
| ExxonMobil's wording | Listed for Delvac Extreme 10W-30 |
| Has the following approvals | Cummins CES 20081 • Cummins CES 20086 • DTFR 15C100 • Detroit Fluids Specification 93K218 • Detroit Fluids Specification 93K222 • DQC II-18 LA • Ford WSS-M2C171-F1 • Mack EO-O Premium Plus • Mack EOS-4.5 • MAN M 3775 • Renault Trucks RLD-3 • Volvo VDS-3 • Volvo VDS-4 • Volvo VDS-4.5 |
| Meets or exceeds the requirements of | API CK-4, CJ-4, CI-4 PLUS, CI-4, CH-4 • ACEA E11, E7 • JASO DH-2 • Caterpillar ECF-3 |
| Recommended for use in applications requiring | API CF • API CG-4 • MAN M 3575 |
Mobil sells three heavy-duty diesel oils that sit side by side on the shelf. This one is the full synthetic Extreme, in 10W-30.
| Product | Base oil | Drain claim (ExxonMobil) |
| Mobil Delvac™ 1300 Super 15W-40 / 10W-30 | Synthetic blend | Up to 1.5X the average OEM drain recommendation* |
| Mobil Delvac™ Extreme 15W-40 / 10W-30 — this oil | Full synthetic | Up to 2X the average OEM drain recommendation* |
| Mobil Delvac 1™ ESP 5W-40 | Full synthetic | Mobil cites “long drain capability”; no multiplier published |
This is an API CK-4 oil. Its published HTHS viscosity of 3.6 mPa·s is above the FA-4 range, which is why it carries CK-4 rather than FA-4 even though it is a 10W-30.
| SAE grade | 10W-30 |
| Kinematic viscosity @ 40 °C | 81.1 mm²/s |
| Kinematic viscosity @ 100 °C | 11.8 mm²/s |
| Viscosity index | 140 |
| HTHS viscosity @ 150 °C | 3.6 mPa·s |
| Cold cranking viscosity @ −25 °C | 6,600 mPa·s |
| MRV viscosity @ −30 °C | 18,400 mPa·s |
| Sulfated ash | 1.0 mass% |
| Total base number | 10.3 mgKOH/g |
| Pour point | −42 °C |
| Flash point (COC) | 219 °C |
| Density @ 15 °C | 0.867 g/mL |
| Manufacturer part number | 122454 |
Typical properties are ExxonMobil published values and represent normal production tolerance. They are not a specification.
Motor oil is a regulated liquid, so we cannot ship to PO boxes, APO/FPO addresses, Alaska, Hawaii or Puerto Rico by air. If your address is outside our standard ground service we will contact you before charging anything.
Need filters, other grades or other Mobil oils for the same service? Browse the rest of our range.
A US lubricants distributor, shipping from our own warehouse in Azusa, California.
Questions about approvals, part numbers or bulk quantities? Call us at (626) 269-7689.
Shipping and delivery
Shipping and delivery
Free shipping within the contiguous 48 states, no minimum order. Orders placed before 1:00 PM Pacific on a business day ship the same day; after that, the next business day. Delivery is typically 3 to 7 business days depending on distance, and you get tracking by email as soon as it ships.
We also ship to Alaska, Hawaii, U.S. territories and Canada, where the exact cost is calculated at checkout before you pay. Aerosols travel by ground only and cannot go by air.
Not sure this is the right spec?
Not sure this is the right spec?
Call (626) 269-7689 before you order and we will confirm the exact grade and approval your engine or gearbox needs. Two products can share a viscosity grade and be entirely different oils.
If we tell you the wrong one, send it back opened. We pay shipping both ways and refund in full.
If it arrives damaged
If it arrives damaged
Oil occasionally leaks in transit. Photograph the box before you unpack anything else and email sales@calbestsupplies.com within 5 days of delivery. We replace it or refund it in full, shipping included, and in most cases you do not return anything.
